EUROL DIESEL DPF CLEANER 500 ML

Информация от владельца
EUROL DIESEL DPF CLEANER For a complete and rapid regeneration for diesel particulate filters (DPF) Eurol DPF Cleaner is designed to enable the DPF to regenerate more easily when the diesel particulate filter has a higher-than-usual soot loading. Diesel engines are not designed for short trips or start-stop driving conditions. During short trips; a diesel engine does not get up to temperature and more soot is formed during combustion. DPFs clog up due to the quality of fuel; the quality of the engine oil; driving style or urban driving. A DPF equipped car is programmed to renegerate the DPF as soon as the exhaust gets hot enough to reach the DPF regeneration temperature; approximately 600°C. Eurol DPF Cleaner uses a fuel-borne catalyst to lower this temperature to 400°C; making it easier for the carbon particles to be oxidized. This will reduce exhaust gas backpressure; allow the turbo to spool up quicker and; subsequently; increase fuel economy. Eurol DPF Cleaner is recommended to be used if the DPF warning light comes on. If nothing is done while the DPF warning light is on; without using Eurol DPF Cleaner; the DPF might have to be replaced or removed to be fully cleaned; at high cost. The 500ml bottle of Eurol DPF Cleaner is recommended for use in 35L to 65L of diesel. After adding Eurol DPF Cleaner to the fuel; take the car for a longer trip (>50km) while frequently keeping the engine above 2.500 to 3.000 RPM for 30 seconds. Adding Eurol DPF Cleaner to the diesel tank at every service interval will help regenerate the DPF; in all driving conditions. Users should consult the Material Safety Data Sheet of Eurol DPF Clean for information about storage and shelf life. Please ask Eurol R&D if any further information is required. Eurol DPF Cleaner should not be required if your vehicle is equipped with CRT. If problems occur with CRT; go to the nearest dealership and have professionals take a look.